Apply for Future

Choose position

Current position *

Years of experience *

Positions *

Choose up to 3, and one level per discipline — if several levels would suit you, pick the most senior; we assess the level ourselves.

Civil / Structural Designer not open now Civil & Structural DD Civil / Structural Engineer not open now Civil & Structural EN

Prepare Civil & Structural Design Basis

Requirements

Minimum 4 years with an engineering design contractor or engineering consultancy, on Pre-FEED, FEED or detailed design deliverables
Personally authored or checked at least five of: civil and structural design basis; design load schedules and load lists; steel structure and connection design; pipe rack design; shallow and piled foundation design with anchor bolt layouts; concrete design and rebar detailing; foundations for dynamically loaded equipment; structural steel GA and fabrication drawings; site grading, roads, paving, drainage and underground services layout; blast and fire protection design of structures; structural MTO
STAAD.Pro, SAP2000 or ETABS used as a daily working tool, plus AutoCAD; ideally Tekla Structures, IDEA StatiCa or SACS
Working knowledge of the applicable codes (AISC, ACI, Eurocode or BS) and of wind, seismic and blast load derivation
Design experience is current - deliverables produced within the last 3 years
Not qualifying for this role: site construction supervision, site QA/QC, quantity surveying, or building and commercial construction with no industrial plant content.

Responsibilities

Prepare Civil & Structural Design Basis
Design foundations for equipment, structures, pipe racks and tanks
Perform structural analysis and design (steel and concrete)
Produce structural drawings and construction details
Prepare MTO for civil and structural works
Conduct soil investigation review and interpret geotechnical data
Coordinate with Piping, Mechanical and Electrical disciplines for loading data
Review contractor shop drawings and method statements

Tools: STAAD.Pro / ETABS / SAP2000, AutoCAD / Civil 3D, Microsoft Office

Experience: 5-10 yrs

Education: B.Sc. / M.Sc. in Civil Engineering or Structural Engineering

Language: English - professional working proficiency

Senior Civil / Structural Engineer Civil & Structural SE

Lead civil and structural engineering deliverables — calculations, drawings, and design reports — and coordinate with Process, Mechanical, Piping, Electrical and Instrumentation disciplines on Oil & Gas / EPC and industrial projects

Requirements

Minimum 8 years of relevant experience in civil and structural engineering, preferably within Oil & Gas, petrochemical, refinery, or industrial sectors
Personally authored or checked at least six of: civil and structural design basis; design load schedules; steel structure and connection design; pipe rack design; foundation design with anchor bolt layouts; concrete design and rebar detailing; structural steel GA and fabrication drawings
Able to check and approve the deliverables of engineers at EN grade
Has taken a civil and structural scope through at least one full FEED or detailed design cycle to IFC
Strong knowledge of applicable codes and standards: AISC, ACI 318, Eurocode, BS 8110
Experience with seismic and wind load assessment, equipment loads, and lifting loads
Experience reviewing construction contractor documentation and providing technical responses to site queries and RFIs

Responsibilities

Lead and coordinate civil and structural engineering activities throughout the project lifecycle
Develop, review, and approve civil and structural deliverables, including calculations, drawings, specifications, and design reports
Perform and review structural design calculations for foundations, steel structures, reinforced concrete structures, platforms, pipe racks, and equipment supports
Ensure designs comply with applicable international and local codes, standards, and client specifications
Coordinate with Process, Mechanical, Piping, Electrical, and Instrumentation disciplines to resolve technical and interface issues
Review construction drawings, contractor submissions, method statements, and material submissions
Provide technical support during procurement, fabrication, construction, installation, inspection, and commissioning
Participate in site inspections and provide technical solutions to construction-related civil and structural issues
Review and resolve design changes, technical queries, site instructions, and requests for information (RFIs)
Lead or participate in design reviews, constructability reviews, and HAZID/HAZOP meetings
Identify technical risks and design changes affecting project cost, schedule, quality, and constructability
Provide technical guidance, supervision, and mentoring to junior and intermediate civil/structural engineers and designers

Tools: STAAD.Pro / SAP2000 / ETABS / SAFE, AutoCAD / Civil 3D, Tekla Structures / IDEA StatiCa (preferred), Microsoft Office

Experience: 8-15 yrs

Education: Bachelor's degree (or equivalent) in Civil Engineering, Structural Engineering, or a related discipline from a recognized university

Language: English - professional working proficiency

Lead Civil / Structural Engineer not open now Civil & Structural LE

Lead and coordinate the C&ST team's execution of engineering deliverables on the project

Requirements

Minimum 10 years with an engineering design contractor or engineering consultancy, on Pre-FEED, FEED or detailed design deliverables
Has owned the civil and structural design basis for at least one full project and led the discipline scope through to IFC
Personally authored or checked the full deliverable set: civil and structural design basis; design load schedules and load lists; steel structure and connection design; pipe rack design; shallow and piled foundation design with anchor bolt layouts; concrete design and rebar detailing; foundations for dynamically loaded equipment; structural steel GA and fabrication drawings; site grading, roads, paving, drainage and underground services layout; blast and fire protection design of structures; structural MTO
Able to lead a discipline team, allocate man-hours, review CTR estimates and defend the design to a client
STAAD.Pro, SAP2000 or ETABS used as a daily working tool, plus AutoCAD; ideally Tekla Structures, IDEA StatiCa or SACS
Working knowledge of the applicable codes (AISC, ACI, Eurocode or BS) and of wind, seismic and blast load derivation
Design experience is current - deliverables produced within the last 3 years
Not qualifying for this role: site construction supervision, site QA/QC, quantity surveying, or building and commercial construction with no industrial plant content.

Responsibilities

Lead and coordinate the C&ST team's execution of engineering deliverables on the project
Own the C&ST Design Basis and resolve technical queries end-to-end for the discipline scope
Provide final technical review, check and approval (sign-off) of C&ST deliverables prior to issue (IDC/IFR/IFC)
Represent C&ST in project design reviews, HAZOP / interdisciplinary coordination meetings and client interfaces
Plan and monitor C&ST workload, staffing levels and progress against the project schedule
Mentor and develop Senior Engineers, Engineers and Designers within the C&ST team
Act as the escalation point for C&ST technical risks, deviations and vendor / licensor queries
Ensure C&ST deliverables comply with ACI 318, AISC, BS 8110, Eurocode

Tools: STAAD.Pro / ETABS / SAP2000, AutoCAD / Civil 3D, Microsoft Office

Experience: 15-20 yrs

Education: B.Sc. / M.Sc. in Civil Engineering or Structural Engineering

Language: English - professional working proficiency

Process Designer not open now Process DD Process Engineer not open now Process EN Senior Process Engineer Process SE

Support the Project Discipline Lead Engineer on process engineering deliverables across Feasibility, Basic Design, FEED and EPC phases for onshore/offshore oil & gas production facilities

Requirements

BSc or MSc in Chemical Engineering, certified by a professional institute
10+ years engineering experience in an oil and gas environment
Proven experience working on or monitoring FEED and EPC projects for Oil & Gas processing facilities (onshore/offshore)
Ideally has worked on projects from Feasibility phase through Basic Design and FEED to Detailed Design and Construction
Experience of HYSYS/UniSim and Flarent simulation is advantageous
Strong technical autonomy and problem-solving capability
Self-driven with the ability to work independently on complex tasks
Excellent communication skills for multi-location team coordination
Takes ownership of issues and follows them through to completion
Ability to work in an organised and structured fashion, and within time constraints
Excellent verbal and written English communication skills

Responsibilities

Production and checking of standard process engineering deliverables according to Company and international standards
Follow-up of contractor activities, including checking of Contractor documentation in line with Company specifications - simulations, P&IDs, datasheets, Design Basis documents, hydraulic analysis, cause and effects diagrams, Relief and Blowdown calculations, control narratives
Checking of process engineering deliverables originated by others
Preparation of technical reports for different project phases
Participate in various engineering review meetings such as HAZID, HAZOP, SIL, LOPA
Participate in Inter-Discipline Checks (IDC) and ensure comments are properly addressed
Review vendor documentation and coordinate process-related comments with relevant disciplines
Provide technical guidance to Process Engineers and support the Lead/Principal Process Engineer in delivering the project safely, efficiently, and within the agreed schedule and budget

Tools: Aspen HYSYS or UniSim, Flarent

Experience: 10+ yrs

Education: BSc or MSc in Chemical Engineering, certified by a professional institute

Language: Excellent verbal and written English

Lead Process Engineer not open now Process LE

Lead and coordinate the Process team's execution of engineering deliverables on the project

Requirements

Minimum 10 years with an engineering design contractor or engineering consultancy, on Pre-FEED, FEED or detailed design deliverables
Has owned the Process Design Basis for at least one full project and led the discipline scope through to IFC
Personally authored or checked the full deliverable set: PFDs; P&IDs; heat and material balances; hydraulics and line sizing; line list; equipment process datasheets; equipment sizing; relief load calculations; cause & effect matrix; operating philosophy
Able to lead a discipline team, allocate man-hours, review CTR estimates and defend the process design to a client
Aspen HYSYS or UniSim at expert level; Flarenet or equivalent for relief network analysis
Design experience is current - deliverables produced within the last 3 years
Deep knowledge of oil & gas process systems and standards (API, ASME)
Not qualifying for this role: plant operations, production or process support at an operating facility, or commissioning-only experience on its own.

Responsibilities

Lead and coordinate the Process team's execution of engineering deliverables on the project
Own the Process Design Basis and resolve technical queries end-to-end for the discipline scope
Provide final technical review, check and approval (sign-off) of Process deliverables prior to issue (IDC/IFR/IFC)
Represent Process in project design reviews, HAZOP / interdisciplinary coordination meetings and client interfaces
Plan and monitor Process workload, staffing levels and progress against the project schedule
Mentor and develop Senior Engineers, Engineers and Designers within the Process team
Act as the escalation point for Process technical risks, deviations and vendor / licensor queries
Ensure Process deliverables comply with API, ASME, ISO

Tools: Aspen HYSYS / Unisim / Flarenet, Microsoft Office

Experience: 15-20 yrs

Education: B.Sc. / M.Sc. in Chemical Engineering or Process Engineering

Language: English - professional working proficiency

Process Safety Designer not open now Process Safety DD Process Safety Engineer not open now Process Safety EN

Facilitate or support HAZID, HAZOP and LOPA studies across project phases

Requirements

Minimum 4 years with an engineering design contractor or engineering consultancy, on Pre-FEED, FEED or detailed design deliverables
Personally authored or checked at least five of: Safety Design Basis; hazardous area classification drawings (IEC 60079); fire & gas philosophy and detector layouts; firewater demand and network hydraulics; relief, blowdown and flare studies (API 520/521); SIL determination and verification, SRS; consequence modelling and FERA; EERA and occupied building risk; SCE register and performance standards; cause & effect matrices and ESD hierarchy
Design experience is current - deliverables produced within the last 3 years
Hands-on working use of PHAST or Safeti
Knowledge of HAZOP / HAZID / LOPA facilitation methodology
Understanding of SIL and functional safety concepts (IEC 61508 / 61511)
Not qualifying for this role: plant operations, site HSE, process safety management at an operating facility, or commissioning-only experience. NEBOSH, IOSH and OSHA certifications do not substitute for design-office experience.

Responsibilities

Facilitate or support HAZID, HAZOP and LOPA studies across project phases
Perform consequence modelling (fire, explosion, toxic release) using PHAST/Safeti/ALOHA or equivalent
Support SIL determination and functional safety requirements for process control systems
Prepare Process Safety Design Basis and study reports
Review inherently safer design alternatives during Pre-FEED/FEED
Coordinate with Process and HSE disciplines on process safety risk close-out

Tools: PHAST / Safeti / ALOHA, PHA-Pro or equivalent, Microsoft Office

Experience: 5-10 yrs

Education: B.Sc. in Chemical or Process Engineering (Process Safety specialisation preferred)

Language: English - professional working proficiency

Senior Process Safety Engineer Process Safety SE

Develop process safety and fire & gas engineering deliverables - firewater/foam systems, HAC, F&G philosophy, safety layout and Emergency Response Plans - for oil & gas FEED and EPC projects

Requirements

Strong experience in fire protection and process safety engineering within oil and gas, energy, or industrial projects
Proficiency in developing firewater and foam system P&IDs and related engineering documentation
Solid understanding of fire and gas detection systems, including cause and effect development
Experience with Hazardous Area Classification and relevant international standards (e.g., IEC, ATEX)
Demonstrated involvement in HAZID, HAZOP, and LOPA studies
Ability to prepare technical specifications, data sheets, and material requisitions
Experience coordinating with vendors and external consultants
Strong knowledge of emergency response planning and safety system design
Excellent communication skills with the ability to interface across multiple disciplines
Strong analytical, problem-solving, and organizational skills

Responsibilities

Develop detailed firewater and foam system P&IDs, including fire hydrants, monitors, deluge systems, and foam skids
Prepare equipment data sheets and material requisitions to support vendor selection and procurement activities
Produce fire and gas detection layouts and define fire and gas cause and effect matrices
Provide safety engineering input and advisory support to multidisciplinary teams
Perform Hazardous Area Classification studies in accordance with applicable standards
Develop safety equipment layouts, including escape routes and emergency access provisions
Prepare Emergency Response Plans aligned with project and regulatory requirements
Manage and coordinate fire and gas mapping and QRA Consultants to ensure quality and compliance
Define and contribute to HAZID, HAZOP, and LOPA Terms of Reference (ToR) and participate in associated studies
Develop and author safety philosophies, including fire protection philosophy, passive fire protection philosophy, and safety equipment philosophy

Tools: Pipenet, Microsoft Office

Experience: 5-10 yrs

Education: B.Sc. in Chemical, Process, or Mechanical Engineering (Safety specialisation preferred)

Language: English — professional working proficiency

Lead Process Safety Engineer not open now Process Safety LE

Lead and coordinate the Process Safety team's execution of engineering deliverables on the project

Requirements

Minimum 10 years with an engineering design contractor or engineering consultancy, on Pre-FEED, FEED or detailed design deliverables
Has owned the Process Safety Design Basis for at least one full project and led the discipline scope through to IFC
Personally authored or checked the full deliverable set: Safety Design Basis; hazardous area classification drawings (IEC 60079); fire & gas philosophy and detector layouts; firewater demand and network hydraulics; relief, blowdown and flare studies (API 520/521); SIL determination and verification, SRS; consequence modelling and FERA; EERA and occupied building risk; SCE register and performance standards; cause & effect matrices and ESD hierarchy
Able to lead a discipline team, allocate man-hours and defend the safety case to a client
Chairs HAZOP / HAZID / LOPA sessions
Design experience is current - deliverables produced within the last 3 years
Hands-on working use of PHAST or Safeti
Not qualifying for this role: plant operations, site HSE, process safety management at an operating facility, or commissioning-only experience. NEBOSH, IOSH and OSHA certifications do not substitute for design-office experience.

Responsibilities

Lead and coordinate the Process Safety team's execution of engineering deliverables on the project
Own the Process Safety Design Basis and resolve technical queries end-to-end for the discipline scope
Provide final technical review, check and approval (sign-off) of Process Safety deliverables prior to issue (IDC/IFR/IFC)
Represent Process Safety in project design reviews, HAZOP / interdisciplinary coordination meetings and client interfaces
Plan and monitor Process Safety workload, staffing levels and progress against the project schedule
Mentor and develop Senior Engineers, Engineers and Designers within the Process Safety team
Act as the escalation point for Process Safety technical risks, deviations and vendor / licensor queries
Ensure Process Safety deliverables comply with IEC 61508/61511, IEC 61882 (HAZOP), CCPS guidelines, LOPA methodology

Tools: PHAST / Safeti / ALOHA (or equivalent), PHA-Pro or equivalent HAZOP/LOPA facilitation software, Microsoft Office

Experience: 15-20 yrs

Education: B.Sc. in Chemical or Process Engineering (Process Safety specialisation preferred)

Language: English - professional working proficiency

HSE Designer not open now HSE DD HSE Engineer not open now HSE EN

Develop firewater/foam system P&IDs (hydrants, monitors, deluge, foam skids)

Requirements

Minimum 4 years with an engineering design contractor or engineering consultancy, on Pre-FEED, FEED or detailed design deliverables
Personally authored or checked at least five of: project HSE design philosophy and HSE deliverables register; ENVID and environmental impact assessment input; noise study and noise control design; ergonomics and human factors review; occupational health risk assessment; waste, effluent and emissions management design; HSE requirements written into specifications and equipment datasheets; regulatory and permitting compliance matrix; HSE input to plot plan and layout reviews
noise modelling software such as CadnaA or SoundPLAN; Microsoft Office; AutoCAD for layout mark-ups
If your background is process safety design - HAZOP facilitation, SIL, fire and gas, hazardous area classification - apply to the Process Safety discipline instead, not to HSE
Design experience is current - deliverables produced within the last 3 years
Not qualifying for this role: site HSE supervision, permit-to-work coordination, toolbox talks, behaviour-based safety, construction safety officer roles, or ISO 45001 and ISO 14001 auditing. NEBOSH, IOSH and OSHA certifications do not substitute for design-office experience.

Responsibilities

Develop firewater/foam system P&IDs (hydrants, monitors, deluge, foam skids)
Prepare equipment data sheets and material requisitions
Produce F&G detection layouts and cause & effect matrices
Perform Hazardous Area Classification studies
Develop safety equipment layouts incl. escape routes and emergency access
Prepare Emergency Response Plans
Manage fire and gas mapping consultants
Support environmental and occupational health compliance reviews
Author safety philosophies (fire protection, passive fire protection, safety equipment)

Tools: Pipenet, AutoCAD, Microsoft Office

Experience: 5-10 yrs

Education: B.Sc. in Chemical, Process, or Mechanical Engineering, or HSE (HSE specialisation preferred)

Language: English - professional working proficiency

Senior HSE Engineer HSE SE

Develop and check key HSE engineering deliverables within own area of responsibility

Requirements

Minimum 7 years with an engineering design contractor or engineering consultancy, on Pre-FEED, FEED or detailed design deliverables
Personally authored or checked at least six of: project HSE design philosophy and HSE deliverables register; ENVID and environmental impact assessment input; noise study and noise control design; ergonomics and human factors review; occupational health risk assessment; waste, effluent and emissions management design; HSE requirements written into specifications and equipment datasheets; regulatory and permitting compliance matrix; HSE input to plot plan and layout reviews
Able to check and approve the deliverables of engineers at EN grade
Has taken a HSE design scope through at least one full FEED or detailed design cycle to IFC
noise modelling software such as CadnaA or SoundPLAN; Microsoft Office; AutoCAD for layout mark-ups
If your background is process safety design - HAZOP facilitation, SIL, fire and gas, hazardous area classification - apply to the Process Safety discipline instead, not to HSE
Design experience is current - deliverables produced within the last 3 years
Not qualifying for this role: site HSE supervision, permit-to-work coordination, toolbox talks, behaviour-based safety, construction safety officer roles, or ISO 45001 and ISO 14001 auditing. NEBOSH, IOSH and OSHA certifications do not substitute for design-office experience.

Responsibilities

Develop and check key HSE engineering deliverables within own area of responsibility
Verify calculations and deliverables prepared by Engineers within own area of responsibility
Provide technical guidance to Engineers on complex or non-routine HSE issues
Represent the HSE discipline in specific model / design reviews as assigned by the Lead Engineer
Ensure own deliverables comply with IEC 60079, NFPA, API RP 750/752, applicable local HSE regulations

Tools: Pipenet, AutoCAD (safety layout markups), Microsoft Office

Experience: 10-15 yrs

Education: B.Sc. in Chemical, Process, or Mechanical Engineering, or HSE (HSE specialisation preferred)

Language: English - professional working proficiency

Lead HSE Engineer not open now HSE LE

Lead and coordinate the HSE team's execution of engineering deliverables on the project

Requirements

Minimum 10 years with an engineering design contractor or engineering consultancy, on Pre-FEED, FEED or detailed design deliverables
Has owned the HSE design design basis for at least one full project and led the discipline scope through to IFC
Personally authored or checked the full deliverable set: project HSE design philosophy and HSE deliverables register; ENVID and environmental impact assessment input; noise study and noise control design; ergonomics and human factors review; occupational health risk assessment; waste, effluent and emissions management design; HSE requirements written into specifications and equipment datasheets; regulatory and permitting compliance matrix; HSE input to plot plan and layout reviews
Able to lead a discipline team, allocate man-hours, review CTR estimates and defend the design to a client
noise modelling software such as CadnaA or SoundPLAN; Microsoft Office; AutoCAD for layout mark-ups
If your background is process safety design - HAZOP facilitation, SIL, fire and gas, hazardous area classification - apply to the Process Safety discipline instead, not to HSE
Design experience is current - deliverables produced within the last 3 years
Not qualifying for this role: site HSE supervision, permit-to-work coordination, toolbox talks, behaviour-based safety, construction safety officer roles, or ISO 45001 and ISO 14001 auditing. NEBOSH, IOSH and OSHA certifications do not substitute for design-office experience.

Responsibilities

Lead and coordinate the HSE team's execution of engineering deliverables on the project
Own the HSE Design Basis and resolve technical queries end-to-end for the discipline scope
Provide final technical review, check and approval (sign-off) of HSE deliverables prior to issue (IDC/IFR/IFC)
Represent HSE in project design reviews, HAZOP / interdisciplinary coordination meetings and client interfaces
Plan and monitor HSE workload, staffing levels and progress against the project schedule
Mentor and develop Senior Engineers, Engineers and Designers within the HSE team
Act as the escalation point for HSE technical risks, deviations and vendor / licensor queries
Ensure HSE deliverables comply with IEC 60079, NFPA, API RP 750/752, applicable local HSE regulations

Tools: Pipenet, AutoCAD (safety layout markups), Microsoft Office

Experience: 15-20 yrs

Education: B.Sc. in Chemical, Process, or Mechanical Engineering, or HSE (HSE specialisation preferred)

Language: English - professional working proficiency

Electrical Designer not open now Electrical DD Electrical Engineer not open now Electrical EN

Prepare Electrical Design Basis and Area Classification drawings

Requirements

Minimum 4 years with an engineering design contractor or engineering consultancy, on Pre-FEED, FEED or detailed design deliverables
Personally authored or checked at least five of: electrical design basis; electrical load list; load flow, short circuit, motor starting and arc flash studies; single line diagrams; cable schedule, cable sizing and routing; earthing and lightning protection design; Ex equipment selection against the hazardous area classification; substation, switchgear and MCC layouts; lighting design; UPS and DC systems; electrical equipment datasheets and technical bid evaluations
ETAP or SKM PowerTools used as a daily working tool, plus AutoCAD; ideally DIALux for lighting
Working knowledge of IEC 60079, IEC 61439 and the applicable IEEE or IEC power system standards
Design experience is current - deliverables produced within the last 3 years
Not qualifying for this role: plant electrical maintenance, site installation supervision, testing and commissioning only, or building and LV electrical design with no industrial plant content.

Responsibilities

Prepare Electrical Design Basis and Area Classification drawings
Develop Single Line Diagrams (SLD), load list and power balance
Design HV/MV/LV switchgear, MCCs and transformers
Prepare cable schedules, cable routing and tray layout drawings
Develop earthing and lightning protection design
Prepare lighting layout drawings and illumination calculations
Review vendor drawings and perform TBEs
Ensure compliance with IEC, IEEE and NEC standards

Tools: ETAP or SKM PowerTools, AutoCAD, Microsoft Office

Experience: 5-10 yrs

Education: B.Sc. in Electrical Engineering or Power Systems

Language: English - professional working proficiency

Senior Electrical Design Engineer Electrical SE

Lead and take ownership of electrical engineering deliverables for oil & gas EPC projects, providing technical direction to junior engineers and acting as primary technical interface with clients, vendors, and other disciplines

Requirements

Bachelor's degree in Electrical Engineering (Master's degree an advantage)
8-15+ years of experience in electrical design engineering within EPC environments, with substantial experience in oil & gas / petrochemical / refinery projects
Demonstrated experience leading electrical design packages from FEED through detailed design and construction support
Strong background in cathodic protection (ICCP) system design and vendor package evaluation is highly desirable
Proven experience conducting and leading Technical Bid Evaluations (TBE) and vendor document reviews
Advanced knowledge of IEC 60909, IEC 60079-10-1, IEEE 80, IEC 61439, API RP 651, NACE SP0193, and EN 12954/EN 16299 (CP-related standards)
Expertise in hazardous area classification and equipment certification (ATEX/IECEx/NEC)
Ability to independently verify and challenge vendor engineering calculations
Familiarity with EPC project documentation systems (MDR, TQ registers, RAG-status tracking)
Strong leadership and mentoring capability for junior engineering staff
Excellent technical writing and communication skills in English (formal correspondence, review comments, TBE reports)

Responsibilities

Lead the development and technical review of all electrical engineering deliverables, including SLDs, cable schedules, load lists, hazardous area classification, earthing/grounding systems, lighting/small power design
Perform and independently verify complex electrical calculations: short circuit analysis (IEC 60909), load flow, arc flash, motor starting, voltage drop, and earthing/grounding design (IEEE 80)
Lead Technical Bid Evaluations (TBE) for electrical and CP equipment packages, including development of weighted scoring criteria, technical query (TQ) registers, and risk assessments
Review and approve vendor engineering documents (drawings, datasheets, calculation reports) and issue formal technical review comments in accordance with client procedures
Provide technical mentorship and quality checking for junior/mid-level electrical design engineers, reviewing their deliverables prior to internal/client submission
Interface directly with clients, licensors, and vendors during design reviews, technical clarification meetings, and vendor negotiations
Ensure compliance with hazardous area classification requirements (IEC 60079 series / API RP 500 / NEC as applicable) and coordinate equipment selection accordingly
Manage electrical discipline input to Master Document Registers (MDR), man-hour estimates, and project schedules; coordinate deliverable interfaces with other disciplines (instrumentation, mechanical, civil/structural, process)
Ensure all designs comply with relevant international standards (IEC, IEEE, NEC, API RP 651, NACE SP0193, EN standards) and project/client specifications

Tools: ETAP, SKM or DIgSILENT, AutoCAD, MicroStation or SmartPlant Electrical

Experience: 8-15+ yrs

Education: Bachelor's degree in Electrical Engineering (Master's degree an advantage)

Language: Excellent technical writing and communication skills in English

Lead Electrical Engineer not open now Electrical LE

Lead and coordinate the Electrical team's execution of engineering deliverables on the project

Requirements

Minimum 10 years with an engineering design contractor or engineering consultancy, on Pre-FEED, FEED or detailed design deliverables
Has owned the electrical design basis for at least one full project and led the discipline scope through to IFC
Personally authored or checked the full deliverable set: electrical design basis; electrical load list; load flow, short circuit, motor starting and arc flash studies; single line diagrams; cable schedule, cable sizing and routing; earthing and lightning protection design; Ex equipment selection against the hazardous area classification; substation, switchgear and MCC layouts; lighting design; UPS and DC systems; electrical equipment datasheets and technical bid evaluations
Able to lead a discipline team, allocate man-hours, review CTR estimates and defend the design to a client
ETAP or SKM PowerTools used as a daily working tool, plus AutoCAD; ideally DIALux for lighting
Working knowledge of IEC 60079, IEC 61439 and the applicable IEEE or IEC power system standards
Design experience is current - deliverables produced within the last 3 years
Not qualifying for this role: plant electrical maintenance, site installation supervision, testing and commissioning only, or building and LV electrical design with no industrial plant content.

Responsibilities

Lead and coordinate the Electrical team's execution of engineering deliverables on the project
Own the Electrical Design Basis and resolve technical queries end-to-end for the discipline scope
Provide final technical review, check and approval (sign-off) of Electrical deliverables prior to issue (IDC/IFR/IFC)
Represent Electrical in project design reviews, HAZOP / interdisciplinary coordination meetings and client interfaces
Plan and monitor Electrical workload, staffing levels and progress against the project schedule
Mentor and develop Senior Engineers, Engineers and Designers within the Electrical team
Act as the escalation point for Electrical technical risks, deviations and vendor / licensor queries
Ensure Electrical deliverables comply with IEC, IEEE, NEC

Tools: ETAP or SKM PowerTools, AutoCAD, Microsoft Office

Experience: 15-20 yrs

Education: B.Sc. in Electrical Engineering or Power Systems

Language: English - professional working proficiency

Instrumentation Designer not open now Instrumentation & Control DD Instrumentation Engineer not open now Instrumentation & Control EN

Prepare Instrumentation Design Basis and Control Philosophy documents

Requirements

Minimum 4 years with an engineering design contractor or engineering consultancy, on Pre-FEED, FEED or detailed design deliverables
Personally authored or checked at least five of: instrumentation design basis; instrument index and instrument datasheets; instrumentation development of P&IDs; control and safeguarding philosophy; I/O list; junction box and instrument cable schedules; hook-up drawings; control valve, relief and flow element sizing; safety instrumented system interface, SIL loop design and SRS; DCS, ESD and F&G system specification and technical bid evaluation; loop diagrams
SmartPlant Instrumentation (INtools) or AVEVA Instrumentation used as a daily working tool, plus AutoCAD; ideally InstruCalc or equivalent sizing software
Working knowledge of IEC 61511, ISA standards and Ex instrument selection under IEC 60079
Design experience is current - deliverables produced within the last 3 years
Not qualifying for this role: plant instrument maintenance, calibration workshop work, or site commissioning only.

Responsibilities

Prepare Instrumentation Design Basis and Control Philosophy documents
Develop instrument index, I/O list, instrument datasheets, TBE and MR
Prepare Cause & Effect diagrams and SIL classification
Design and specify control panels, ESD systems, F&G detection systems
Review vendor submittals for instrumentation equipment
Coordinate with Process (P&IDs), Electrical and Telecom disciplines
Support commissioning and loop testing

Tools: SmartPlant Instrumentation (Intools) or AVEVA Instrumentation, AutoCAD

Experience: 5-10 yrs

Education: B.Sc. in Instrumentation, Electrical & Electronics, or Control Engineering

Language: English - professional working proficiency

Senior Control and Instrumentation Engineer Instrumentation & Control SE

Concept, FEED and Detail Control and Instrumentation design engineering for Oil & Gas onshore/offshore facilities and petrochemical plants

Requirements

Bachelor's degree in a relevant field and 8+ years of extensive experience in instrumentation engineering, including design, implementation, and project execution
Comprehensive experience across all project phases including FEED, Detailed Design, and EPC execution
Conversant with relevant international and local standards and codes of practice
Demonstrated ability to apply Autodesk design tools effectively in engineering and design workflows is an advantage
Familiarity with state health and safety regulations
Working knowledge of English is an advantage

Responsibilities

Ensure planned engineering (Control and Instrumentation) progress with respect to engineering deliverables and awarded projects, engineering planning & scheduling, preparation of progress reports
Provision of Control and Instrumentation Design, Basic & Detail Engineering including Process Control Systems, Emergency Shutdown Systems, Fire & Gas detection systems, and Telecommunication systems - studies, analysis and design calculations for tenders and awarded projects
Check and review engineering deliverables (drawings & documents) such as equipment and cable routing layouts, block and loop diagrams, equipment datasheets and specifications, MTOs and BOQs, and provide engineering input to other disciplines
Verify that all systems are designed and implemented in accordance with applicable safety standards such as IEC, ISA and SIL, and internal QA/QC procedures
Review clients' tender documents, specifications, datasheets, and verify FEED design & calculations
Prepare and issue RFQs, evaluate vendor quotations, clarifications, and Technical Bid Analysis
Review vendor documents, drawings, datasheets, specifications and calculations
Monitor project progress and quality to identify issues, and propose corrective measures to ensure compliance with project objectives
Conduct onshore or offshore surveys and provide related reports as required
Support procurement and engineering teams in bid evaluation and vendor selection activities

Tools: Autodesk design tools (AutoCAD or equivalent)

Experience: 8+ yrs

Education: Bachelor's degree in a relevant field

Language: Working knowledge of English is an advantage

Lead Instrumentation Engineer not open now Instrumentation & Control LE

Lead and coordinate the Instrumentation team's execution of engineering deliverables on the project

Requirements

Minimum 10 years with an engineering design contractor or engineering consultancy, on Pre-FEED, FEED or detailed design deliverables
Has owned the instrumentation and control design basis for at least one full project and led the discipline scope through to IFC
Personally authored or checked the full deliverable set: instrumentation design basis; instrument index and instrument datasheets; instrumentation development of P&IDs; control and safeguarding philosophy; I/O list; junction box and instrument cable schedules; hook-up drawings; control valve, relief and flow element sizing; safety instrumented system interface, SIL loop design and SRS; DCS, ESD and F&G system specification and technical bid evaluation; loop diagrams
Able to lead a discipline team, allocate man-hours, review CTR estimates and defend the design to a client
SmartPlant Instrumentation (INtools) or AVEVA Instrumentation used as a daily working tool, plus AutoCAD; ideally InstruCalc or equivalent sizing software
Working knowledge of IEC 61511, ISA standards and Ex instrument selection under IEC 60079
Design experience is current - deliverables produced within the last 3 years
Not qualifying for this role: plant instrument maintenance, calibration workshop work, or site commissioning only.

Responsibilities

Lead and coordinate the Instrumentation team's execution of engineering deliverables on the project
Own the Instrumentation Design Basis and resolve technical queries end-to-end for the discipline scope
Provide final technical review, check and approval (sign-off) of Instrumentation deliverables prior to issue (IDC/IFR/IFC)
Represent Instrumentation in project design reviews, HAZOP / interdisciplinary coordination meetings and client interfaces
Plan and monitor Instrumentation workload, staffing levels and progress against the project schedule
Mentor and develop Senior Engineers, Engineers and Designers within the Instrumentation team
Act as the escalation point for Instrumentation technical risks, deviations and vendor / licensor queries
Ensure Instrumentation deliverables comply with IEC 61511, ISA-5.1, ISA-18.2

Tools: SmartPlant Instrumentation (Intools) or AVEVA Instrumentation, AutoCAD

Experience: 15-20 yrs

Education: B.Sc. in Instrumentation, Electrical & Electronics, or Control Engineering

Language: English - professional working proficiency

Telecom Designer not open now Telecom DD Telecom Engineer not open now Telecom EN

Prepare Telecom Design Basis and Telecom Philosophy documents

Requirements

Minimum 4 years with an engineering design contractor or engineering consultancy, on Pre-FEED, FEED or detailed design deliverables
Personally authored or checked at least five of: telecom design basis and system architecture; PAGA design and intelligibility calculations; CCTV, access control and perimeter security design; radio, TETRA and microwave link coverage studies; structured cabling and fibre optic network design; telecom equipment room and rack layouts; telemetry and SCADA communication interfaces; telecom equipment datasheets and technical bid evaluations
AutoCAD, plus a radio planning tool such as EDX, Atoll or equivalent for coverage work
Working knowledge of Ex telecom equipment selection and of the applicable IEC and IEEE telecom standards for oil and gas facilities
Design experience is current - deliverables produced within the last 3 years
Not qualifying for this role: corporate IT support, network administration, or telecom operations and maintenance with no design output.

Responsibilities

Prepare Telecom Design Basis and Telecom Philosophy documents
Design PA/GA (Public Address / General Alarm) systems
Develop CCTV, Access Control and Perimeter Security layouts
Specify Fire Alarm System (FAS) and cable routing
Design radio communication systems (VHF/UHF) and microwave links
Design fiber optic and copper cable infrastructure
Prepare SCADA/DCS communication network topology drawings
Coordinate with Instrumentation, Electrical and HSE disciplines

Tools: AutoCAD, Microsoft Visio (network diagrams), Microsoft Office

Experience: 5-10 yrs

Education: B.Sc. in Telecommunications, Electrical Engineering, or Electronics

Language: English - professional working proficiency

Senior Telecoms Engineer Telecom SE

Prepare Telecom Design Basis and Telecom Philosophy documents

Requirements

Minimum 7 years with an engineering design contractor or engineering consultancy, on Pre-FEED, FEED or detailed design deliverables
Personally authored or checked at least six of: telecom design basis and system architecture; PAGA design and intelligibility calculations; CCTV, access control and perimeter security design; radio, TETRA and microwave link coverage studies; structured cabling and fibre optic network design; telecom equipment room and rack layouts; telemetry and SCADA communication interfaces; telecom equipment datasheets and technical bid evaluations
Able to check and approve the deliverables of engineers at EN grade
Has taken a telecommunications scope through at least one full FEED or detailed design cycle to IFC
AutoCAD, plus a radio planning tool such as EDX, Atoll or equivalent for coverage work
Working knowledge of Ex telecom equipment selection and of the applicable IEC and IEEE telecom standards for oil and gas facilities
Design experience is current - deliverables produced within the last 3 years
Not qualifying for this role: corporate IT support, network administration, or telecom operations and maintenance with no design output.

Responsibilities

Prepare Telecom Design Basis and Telecom Philosophy documents
Design PA/GA, CCTV, Access Control and Perimeter Security systems
Design radio communication systems (VHF/UHF), microwave links, fiber/copper infrastructure
Act as senior Telecom Engineer / technical authority; check & approve deliverables
Mentor, supervise and develop junior telecom engineers
Coordinate with Instrumentation, Electrical and HSE disciplines

Tools: AutoCAD, Microsoft Visio (network diagrams), Microsoft Office

Experience: 12-18 yrs

Education: B.Sc. in Telecommunications, Electrical Engineering, or Electronics

Language: English - professional working proficiency

Lead Telecom Engineer not open now Telecom LE

Lead and coordinate the Telecom team's execution of engineering deliverables on the project

Requirements

Minimum 10 years with an engineering design contractor or engineering consultancy, on Pre-FEED, FEED or detailed design deliverables
Has owned the telecommunications design basis for at least one full project and led the discipline scope through to IFC
Personally authored or checked the full deliverable set: telecom design basis and system architecture; PAGA design and intelligibility calculations; CCTV, access control and perimeter security design; radio, TETRA and microwave link coverage studies; structured cabling and fibre optic network design; telecom equipment room and rack layouts; telemetry and SCADA communication interfaces; telecom equipment datasheets and technical bid evaluations
Able to lead a discipline team, allocate man-hours, review CTR estimates and defend the design to a client
AutoCAD, plus a radio planning tool such as EDX, Atoll or equivalent for coverage work
Working knowledge of Ex telecom equipment selection and of the applicable IEC and IEEE telecom standards for oil and gas facilities
Design experience is current - deliverables produced within the last 3 years
Not qualifying for this role: corporate IT support, network administration, or telecom operations and maintenance with no design output.

Responsibilities

Lead and coordinate the Telecom team's execution of engineering deliverables on the project
Own the Telecom Design Basis and resolve technical queries end-to-end for the discipline scope
Provide final technical review, check and approval (sign-off) of Telecom deliverables prior to issue (IDC/IFR/IFC)
Represent Telecom in project design reviews, HAZOP / interdisciplinary coordination meetings and client interfaces
Plan and monitor Telecom workload, staffing levels and progress against the project schedule
Mentor and develop Senior Engineers, Engineers and Designers within the Telecom team
Act as the escalation point for Telecom technical risks, deviations and vendor / licensor queries
Ensure Telecom deliverables comply with IEC, ITU-T, TIA/EIA telecom standards

Tools: AutoCAD, Microsoft Visio (network diagrams), Microsoft Office

Experience: 15-20 yrs

Education: B.Sc. in Telecommunications, Electrical Engineering, or Electronics

Language: English - professional working proficiency

Mechanical Designer Mechanical DD Mechanical Engineer not open now Mechanical EN

Prepare Mechanical Design Basis and equipment specifications (static/rotating)

Requirements

Minimum 4 years with an engineering design contractor or engineering consultancy, on Pre-FEED, FEED or detailed design deliverables
Personally authored or checked at least five of: mechanical design basis; process and mechanical datasheets for pressure vessels, heat exchangers, storage tanks, pumps, compressors and package units; mechanical design calculations to ASME VIII, API 650, API 620, API 610 or API 617; material selection and corrosion allowance; equipment layout and maintenance access review; packaged equipment specifications and vendor document review; technical bid evaluations; equipment MTO and spare parts lists
PV Elite or COMPRESS for static equipment, or HTRI for thermal design, used as a daily working tool, plus AutoCAD
Working knowledge of ASME, API and TEMA codes as applied to design, not only to inspection
Design experience is current - deliverables produced within the last 3 years
Not qualifying for this role: plant maintenance, rotating equipment overhaul, workshop repair, or reliability and operations roles with no design deliverables.

Responsibilities

Prepare Mechanical Design Basis and equipment specifications (static/rotating)
Develop datasheets for pressure vessels, heat exchangers, pumps, compressors, tanks
Review vendor drawings and technical proposals
Perform mechanical equipment sizing calculations
Prepare Material Requisitions (MR) and Technical Bid Evaluations (TBE)
Coordinate with Process, Piping and Structural disciplines
Ensure compliance: ASME VIII, API 610/617/650/653

Tools: PV Elite or equivalent (advantage), AutoCAD, Microsoft Office (Excel)

Experience: 5-10 yrs

Education: B.Sc. / M.Sc. in Mechanical Engineering

Language: English - professional working proficiency

Senior Rotary Equipment Design Engineer Mechanical SE

Lead the engineering, technical evaluation, specification, selection and vendor coordination of rotary equipment - pumps, compressors, fans/blowers, agitators/mixers, turbines - for oil & gas, petrochemical, refining and industrial projects

Requirements

Bachelor's Degree in Mechanical Engineering from a recognized university
Minimum 8+ years of relevant experience in rotary equipment engineering, preferably in oil & gas, petrochemical, refinery, power, or industrial projects
Strong experience in the engineering and technical evaluation of pumps, compressors, mixers/agitators, blowers, fans, and other rotating equipment
Strong knowledge of applicable international standards, including API 610, API 685, API 674, API 675, API 676, API 617, API 618, API 682, API 614, API 670, ISO 5199, ISO 13709
Experience preparing and reviewing equipment datasheets, technical specifications, requisitions, TBE, vendor documents, and inspection/testing requirements
Good understanding of pump hydraulics, system requirements, NPSH, pump curves, minimum flow, cavitation, mechanical seals, bearing systems, lubrication systems, couplings, drivers, and vibration requirements
Strong vendor coordination and technical clarification experience
Good understanding of equipment interfaces with piping, process, electrical, and instrumentation systems
Experience with API 610 centrifugal pumps and API 682 mechanical seals / seal support systems is preferred
Experience with compressor packages and auxiliary systems is preferred
Familiarity with API 614 lubrication and seal oil systems and API 670 machinery protection systems is preferred
Strong analytical, problem-solving, communication, and coordination skills

Responsibilities

Lead the engineering and technical activities for rotary equipment, including centrifugal and positive displacement pumps, compressors, centrifugal and axial fans/blowers, agitators and mixers, turbines and other rotating machinery as applicable
Prepare and review equipment datasheets, mechanical specifications, requisitions, material specifications, and other engineering documents
Establish equipment design criteria and develop technical requirements based on project specifications, process requirements, and applicable codes and standards
Review process data and ensure correct equipment selection based on flow, head, pressure, temperature, capacity, efficiency, NPSH, operating conditions, and other relevant parameters
Prepare and review Technical Bid Evaluations (TBE) and provide technical recommendations for equipment procurement
Review vendor quotations and conduct detailed technical evaluation of vendor proposals; manage technical clarification cycles with vendors
Review vendor documents, including general arrangement drawings, performance curves, hydraulic calculations, mechanical data, shaft and bearing data, seal arrangements, coupling details, motor/driver data, vibration requirements, inspection and testing procedures, and material certificates
Coordinate with Process, Piping, Electrical, Instrumentation, Civil/Structural, and other engineering disciplines to resolve equipment interfaces and technical issues
Coordinate with vendors, manufacturers, clients, and third-party inspection agencies
Review and approve vendor drawings, calculations, data sheets, specifications, and technical documentation
Provide technical support during procurement, manufacturing, inspection, testing, installation, commissioning, and start-up
Participate in design reviews, HAZOP/HAZID, vendor meetings, client meetings, inspection meetings, and project technical discussions

Tools: Vendor data review and rotating-equipment calculation software (as applicable), AutoCAD, Microsoft Office (Excel)

Experience: 8+ yrs

Education: Bachelor’s Degree in Mechanical Engineering from a recognized university

Language: English — professional working proficiency

Senior Static Equipment Design Engineer Mechanical SE

Lead the design and engineering of static equipment - pressure vessels, storage tanks, heat exchangers, columns, drums, separators - for oil & gas, petrochemical, refining and industrial projects

Requirements

Bachelor's Degree in Mechanical Engineering from a recognized university
Minimum 8+ years of relevant experience in static equipment design and engineering, preferably in oil & gas, petrochemical, refinery, or industrial sectors
Strong practical experience in mechanical design of pressure vessels, storage tanks, heat exchangers, columns, drums, and related static equipment
Strong knowledge of international engineering codes and standards, including ASME Section VIII, API 650, API 620, TEMA, ASTM, and applicable project/client specifications
Experience preparing and reviewing mechanical design calculations and engineering documentation
Experience with engineering software such as Codeware COMPRESS, PV Elite, AMETank, NozzlePRO, AutoCAD, or equivalent tools
Good understanding of equipment fabrication, inspection, testing, and construction requirements
In-depth knowledge of API 650 / API 620 storage tank design, including seismic, wind, nozzle, roof, anchorage, and related design requirements is preferred
Experience with FEA/nozzle analysis and interpretation of analysis results is preferred
Strong analytical, problem-solving, communication, and coordination skills
Ability to work independently and take technical ownership of assigned equipment and engineering activities

Responsibilities

Lead the design and engineering of static equipment, including pressure vessels, storage tanks, heat exchangers, columns, drums, separators, filters, and other static equipment
Develop and review equipment datasheets, design calculations, material specifications, technical specifications, requisitions, and engineering documents
Perform mechanical design calculations in accordance with applicable international codes and project specifications
Prepare and review Technical Bid Evaluations (TBE) and provide technical recommendations for equipment procurement
Review and evaluate vendor offers, drawings, calculations, datasheets, material specifications, and other vendor documentation
Coordinate with Process, Piping, Civil/Structural, Electrical, Instrumentation, and other engineering disciplines to resolve technical and interface issues
Lead technical communication and clarification with clients, vendors, suppliers, and third-party organizations
Provide technical guidance and support to junior and intermediate engineers
Review engineering deliverables to ensure technical accuracy, consistency, and compliance with project requirements
Support procurement, fabrication, inspection, construction, and commissioning activities as required
Participate in design reviews, HAZOP/HAZID, constructability reviews, client meetings, vendor meetings, and project technical discussions
Identify technical risks, design changes, and potential impacts on project cost and schedule

Tools: Codeware COMPRESS or PV Elite, AMETank, NozzlePRO, AutoCAD

Experience: 8+ yrs

Education: Bachelor’s Degree in Mechanical Engineering from a recognized university

Language: English — professional working proficiency

Lead Mechanical Engineer not open now Mechanical LE

Lead and coordinate the Mechanical team's execution of engineering deliverables on the project

Requirements

Minimum 10 years with an engineering design contractor or engineering consultancy, on Pre-FEED, FEED or detailed design deliverables
Has owned the mechanical design basis for at least one full project and led the discipline scope through to IFC
Personally authored or checked the full deliverable set: mechanical design basis; process and mechanical datasheets for pressure vessels, heat exchangers, storage tanks, pumps, compressors and package units; mechanical design calculations to ASME VIII, API 650, API 620, API 610 or API 617; material selection and corrosion allowance; equipment layout and maintenance access review; packaged equipment specifications and vendor document review; technical bid evaluations; equipment MTO and spare parts lists
Able to lead a discipline team, allocate man-hours, review CTR estimates and defend the design to a client
PV Elite or COMPRESS for static equipment, or HTRI for thermal design, used as a daily working tool, plus AutoCAD
Working knowledge of ASME, API and TEMA codes as applied to design, not only to inspection
Design experience is current - deliverables produced within the last 3 years
Not qualifying for this role: plant maintenance, rotating equipment overhaul, workshop repair, or reliability and operations roles with no design deliverables.

Responsibilities

Lead and coordinate the Mechanical team's execution of engineering deliverables on the project
Own the Mechanical Design Basis and resolve technical queries end-to-end for the discipline scope
Provide final technical review, check and approval (sign-off) of Mechanical deliverables prior to issue (IDC/IFR/IFC)
Represent Mechanical in project design reviews, HAZOP / interdisciplinary coordination meetings and client interfaces
Plan and monitor Mechanical workload, staffing levels and progress against the project schedule
Mentor and develop Senior Engineers, Engineers and Designers within the Mechanical team
Act as the escalation point for Mechanical technical risks, deviations and vendor / licensor queries
Ensure Mechanical deliverables comply with ASME VIII, API 610/617/650/653

Tools: PV Elite or equivalent, AutoCAD, Microsoft Office (Excel)

Experience: 15-20 yrs

Education: B.Sc. / M.Sc. in Mechanical Engineering

Language: English - professional working proficiency

Piping Designer Piping DD Piping Engineer Piping EN Senior Piping Engineer Piping SE Lead Piping Engineer not open now Piping LE

Lead and coordinate the Piping team's execution of engineering deliverables on the project

Requirements

Minimum 10 years with an engineering design contractor or engineering consultancy, on Pre-FEED, FEED or detailed design deliverables
Has owned the piping design basis for at least one full project and led the discipline scope through to IFC
Personally authored or checked the full deliverable set: piping design basis; plot plan and equipment layout; piping general arrangements and the 3D model; IFC isometrics; piping material specification, valve and specialty item datasheets; line list and wall thickness calculations; pipe support design and support standards; stress analysis and nozzle load verification; tie-in schedule; MTO and BOQ
Able to lead a discipline team, allocate man-hours, review CTR estimates and defend the design to a client
AVEVA E3D or PDMS, AutoCAD Plant 3D, CADWorx or SmartPlant 3D used as a daily working tool; Caesar II for stress work; Navisworks for model review
Working knowledge of ASME B31.3 and of 3D model review at the 30, 60 and 90 percent stages
Design experience is current - deliverables produced within the last 3 years
Not qualifying for this role: site piping erection or fabrication supervision, spool shop work, field fitting, or as-built updating only.

Responsibilities

Lead and coordinate the Piping team's execution of engineering deliverables on the project
Own the Piping Design Basis and resolve technical queries end-to-end for the discipline scope
Provide final technical review, check and approval (sign-off) of Piping deliverables prior to issue (IDC/IFR/IFC)
Represent Piping in project design reviews, HAZOP / interdisciplinary coordination meetings and client interfaces
Plan and monitor Piping workload, staffing levels and progress against the project schedule
Mentor and develop Senior Engineers, Engineers and Designers within the Piping team
Act as the escalation point for Piping technical risks, deviations and vendor / licensor queries
Ensure Piping deliverables comply with ASME B31.3, B31.4, B31.8, API 570

Tools: CAESAR II (or AutoPIPE), AVEVA E3D / PDMS / SmartPlant 3D, AutoCAD

Experience: 15-20 yrs

Education: B.Sc. in Mechanical Engineering or Piping Engineering

Language: English - professional working proficiency

Senior Pipeline Engineer Pipeline SE

Lead onshore and offshore pipeline design — route selection, hydraulic analysis, wall thickness and pipeline sizing — and coordinate with Process, Civil, Geotechnical, Structural and HSE disciplines on Oil & Gas / Midstream EPC projects

Requirements

In-depth knowledge of pipeline design, construction, commissioning and integrity management
Strong understanding of ASME B31.4, ASME B31.8, API 1104, API 5L and relevant international standards
Experience in hydraulic analysis, flow assurance fundamentals, pipeline routing and material selection
Knowledge of cathodic protection, corrosion mitigation, coatings and pipeline integrity assessment
Ability to review PFDs, P&IDs, route drawings, alignment sheets and construction documentation
Strong project coordination, technical reporting and stakeholder management skills
Excellent analytical, problem-solving and leadership capabilities

Responsibilities

Develop and review Project Scope of Services, Basis of Design, Scope of Facilities, and engineering execution plans for pipeline projects
Lead onshore and offshore pipeline design activities including route selection, hydraulic analysis, wall thickness calculations, and pipeline sizing
Prepare and review pipeline design deliverables including alignment sheets, crossing drawings, class location studies, material specifications, route maps and construction work packs
Develop and review project estimates, schedules, progress reports, and manpower forecasts
Perform and/or review hydraulic and surge analysis for liquid and gas transmission systems
Review pipeline stress, expansion, buckling and flexibility analyses and issue engineering recommendations
Lead multidisciplinary coordination with Process, Mechanical, Piping, Civil, Geotechnical, Structural, Instrumentation and HSE disciplines
Review vendor and contractor documentation for compliance with project requirements and industry standards
Support procurement activities including MTOs, technical bid evaluations, requisitions and vendor clarifications
Provide technical support during construction, installation, hydrotesting, commissioning and start-up phases
Participate in HAZID, HAZOP, constructability reviews and risk assessments
Ensure compliance with applicable codes and standards including ASME B31.4, ASME B31.8, API, ISO and client specifications

Tools: AutoPIPE / CAESAR II (or equivalent), Bentley OpenFlows / AFT Fathom / PIPEPHASE (or equivalent), AutoCAD / Civil 3D / MicroStation / GIS-based routing tools, Microsoft Office

Experience: 15-20 yrs

Education: Accredited four (4) year degree or global equivalent in Mechanical, Civil, Pipeline, or related Engineering discipline

Language: English — professional working proficiency

Senior Pipeline Engineer (copy) not open now Pipeline SE

Lead onshore and offshore pipeline design — route selection, hydraulic analysis, wall thickness and pipeline sizing — and coordinate with Process, Civil, Geotechnical, Structural and HSE disciplines on Oil & Gas / Midstream EPC projects

Requirements

In-depth knowledge of pipeline design, construction, commissioning and integrity management
Strong understanding of ASME B31.4, ASME B31.8, API 1104, API 5L and relevant international standards
Experience in hydraulic analysis, flow assurance fundamentals, pipeline routing and material selection
Knowledge of cathodic protection, corrosion mitigation, coatings and pipeline integrity assessment
Ability to review PFDs, P&IDs, route drawings, alignment sheets and construction documentation
Strong project coordination, technical reporting and stakeholder management skills
Excellent analytical, problem-solving and leadership capabilities

Responsibilities

Develop and review Project Scope of Services, Basis of Design, Scope of Facilities, and engineering execution plans for pipeline projects
Lead onshore and offshore pipeline design activities including route selection, hydraulic analysis, wall thickness calculations, and pipeline sizing
Prepare and review pipeline design deliverables including alignment sheets, crossing drawings, class location studies, material specifications, route maps and construction work packs
Develop and review project estimates, schedules, progress reports, and manpower forecasts
Perform and/or review hydraulic and surge analysis for liquid and gas transmission systems
Review pipeline stress, expansion, buckling and flexibility analyses and issue engineering recommendations
Lead multidisciplinary coordination with Process, Mechanical, Piping, Civil, Geotechnical, Structural, Instrumentation and HSE disciplines
Review vendor and contractor documentation for compliance with project requirements and industry standards
Support procurement activities including MTOs, technical bid evaluations, requisitions and vendor clarifications
Provide technical support during construction, installation, hydrotesting, commissioning and start-up phases
Participate in HAZID, HAZOP, constructability reviews and risk assessments
Ensure compliance with applicable codes and standards including ASME B31.4, ASME B31.8, API, ISO and client specifications

Tools: AutoPIPE / CAESAR II (or equivalent), Bentley OpenFlows / AFT Fathom / PIPEPHASE (or equivalent), AutoCAD / Civil 3D / MicroStation / GIS-based routing tools, Microsoft Office

Experience: 15-20 yrs

Education: Accredited four (4) year degree or global equivalent in Mechanical, Civil, Pipeline, or related Engineering discipline

Language: English — professional working proficiency

Engineer (General) not open now Project Management & General EN Project Control not open now Project Management & General PC Project Engineer not open now Project Management & General PE Senior Engineer (General) Project Management & General SE Lead Engineer (General) not open now Project Management & General LE Project Manager not open now Project Management & General PM

My role is not on the list

Contact

Full name *

Email *

Phone *

Profiles and contacts *

I have no profile or messenger to add

Right to work

Current location *

City and country — suggestions from GeoNames (CC BY 4.0)

Nationality *

Expectations

Willing to relocate / travel? *

Notice period *

Expected salary *

Gross figure. This is an indication, not a commitment.

Earliest start date *

Cover letter

Tell us a little about your motivation — this is the part of the application a person reads first.

Cover letter *

Documents & consent

Professional registration / licence *

I hold no professional registration

Documents *

CV — required

Your CV is required — PDF, DOC, DOCX or RTF, max 8 MB. You may add up to five more documents — certificates, licences, references — in those formats or as JPG or PNG. Please do not attach passports, ID cards or other identity documents.

How we handle your data — privacy policy

Apply for Future

Applied to us before?

Choose position

Requirements

Responsibilities

Requirements

Responsibilities

Requirements

Responsibilities

Requirements

Responsibilities

Requirements

Responsibilities

Requirements

Responsibilities

Requirements

Responsibilities

Requirements

Responsibilities

Requirements

Responsibilities

Requirements

Responsibilities

Requirements

Responsibilities

Requirements

Responsibilities

Requirements

Responsibilities

Requirements

Responsibilities

Requirements

Responsibilities

Requirements

Responsibilities

Requirements

Responsibilities

Requirements

Responsibilities

Requirements

Responsibilities

Requirements

Responsibilities

Requirements

Responsibilities

Requirements

Responsibilities

Requirements

Responsibilities

Requirements

Responsibilities

Requirements

Responsibilities

Requirements

Responsibilities

Requirements

Responsibilities

Requirements

Responsibilities

Requirements

Responsibilities

Requirements

Responsibilities

Requirements

Responsibilities

Requirements

Responsibilities

Requirements

Responsibilities

Requirements

Responsibilities

Requirements

Responsibilities

Requirements

Responsibilities

Requirements

Responsibilities

Requirements

Responsibilities

Requirements